What you need to set up the Xplova Noza S
Quick answer
To ride the Xplova Noza S you need the following parts. Add a 11-speed cassette on a Shimano/SRAM HG (HyperGlide) body (matching your bike’s drivetrain). The thru-axle adapters are included in the box.
As an Amazon Associate we earn from qualifying purchases. Links below go to the matching part category — pick the exact size/speed for your bike. Affiliate disclosure
Your parts checklist
Cassette
Buy a 11-speed cassette for a Shimano/SRAM HG (HyperGlide) body, matching your bike’s rear-derailleur speed.
Find on AmazonFreehub body
Ships with a Shimano/SRAM HG (HyperGlide) body fitted.
Thru-axle adapter
Included in the box — no separate purchase.
Mounting your bike
What the Xplova Noza S actually asks of you, in order — resolved from its own spec, not a generic manual.
- Take the rear wheel off the bike. A direct-drive trainer replaces it entirely.
- Fit the end caps or thru-axle adapter for your frame. This trainer covers 130 mm quick-release, 135 mm quick-release, 12 × 142 mm thru-axle and 12 × 148 mm Boost thru-axle and ships the adapters in the box, so nothing extra to buy.
- Fit a 11-speed cassette on the Shimano/SRAM HG (HyperGlide) freehub body, torque the lockring, then lower the bike on and engage the axle. The cassette must match your bike’s drivetrain, not the trainer.
- Spacer rule for the Shimano/SRAM HG (HyperGlide) body: an 11-speed cassette needs none, a 10-speed one needs the 1.85 mm spacer behind it. Getting this wrong is the usual cause of a cassette that will not seat or a lockring that bottoms out early.
- Spin the cranks by hand before you clip in: the chain should run quiet and straight. Noise here almost always means chainline or cassette spacing, not a faulty trainer.
Before you buy
Frequently asked questions
It depends on the trainer: typically a cassette matching your bike’s speed on the right freehub body, and a thru-axle adapter if your frame is thru-axle. The checklist above resolves exactly which of these the Xplova Noza S needs.